ну под линуксом уже не интересно.. пока-что попытки подключиться к интернету не увенчались успехом: Код: pppd call donapex noauth debug nodetach Код: Using /dev/pts/3; master fd 6, slave fd 7 pty speed set to 9600 bps pty option: 'pptp 172.16.0.1 --nolaunchpppd --debug' started (pid 922) Using interface sppp0 Connect: sppp0 <--> /dev/pts/3 /etc/ppp/pap-secrets is apparently empty sent [LCP ConfReq id=0xe4 <asyncmap 0x0> <magic 0x80a28d2c> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap m$oft-v2> <magic 0xa8bd7cfd> <pcomp> <accomp>] sent [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap m$oft-v2> <magic 0xa8bd7cfd> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap m$oft-v2> <magic 0xa8bd7cfd> <pcomp> <accomp>] sent [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap m$oft-v2> <magic 0xa8bd7cfd> <pcomp> <accomp>] rcvd [LCP ConfAck id=0xe4 <asyncmap 0x0> <magic 0x80a28d2c> <pcomp> <accomp>] sent [LCP Ident id=0xe5 magic=0x80a28d2c "ppp-2.4.0b1 (Sun Microsystems, Inc.)"] Authenticating to peer with MS-CHAPv2 rcvd [LCP EchoReq id=0x0 magic=0xa8bd7cfd] sent [LCP EchoRep id=0x0 magic=0x80a28d2c] rcvd [CHAP Challenge id=0xff <bccfb740ca2230712a4030b14a33818c>, name = "donapex"] CHAP: Peer gave no name; using 'donapex' as remote name sent [CHAP Response id=0xff <5859029f1f39ea606972bf2c8e921d820000000000000000b7b1b420eb83b466c84c1d476823074ce9b594a1c18415e200>, name = "killerstorm"] sent [CHAP Response id=0xff <5859029f1f39ea606972bf2c8e921d820000000000000000b7b1b420eb83b466c84c1d476823074ce9b594a1c18415e200>, name = "killerstorm"] rcvd [CHAP Failure id=0xff ""] CHAP authentication failed sent [LCP TermReq id=0xe6 "Failed to authenticate ourselves to peer"] rcvd [LCP TermReq id=0x2 "Authentication failed"] sent [LCP TermAck id=0x2] rcvd [LCP TermAck id=0xe6] Connection terminated. Waiting for 1 child processes... pid 922: pptp 172.16.0.1 --nolaunchpppd --debug Child process pptp 172.16.0.1 --nolaunchpppd --debug finished (pid 922), status = 0 пароль и настройки скопировал идентично тому что в линукс, а вот не работает -- похоже MS-CHAPV2 у него не той системы..[/code]
